Cutting Tables3-Axis Cutting TableThis cutting table is the perfect solution for 3 dimensional contours. With this system, the required geometries can be remotely cut, divided and processed. Its modular design facilitates rapid assembly and dismantling as well as setting up for the cut. 
The cutting table is one component of our MACE product.
Cutting Table
| Working area |
1000 mm horizontal, 500 mm vertical, diameter 250 mm rotation |
| Drive |
hydraulic |
| Material |
aluminium and stainless steel |
| Traverse speed |
20–200 mm/min |
| Weight |
70 kg (154.35 lb) |
| Size (L x W x H) |
1300 mm x 1300 mm x 1100 mm |
| Electric power supply |
0.25 kW, 230 V / 50 Hz |
| Hydraulic fluid |
mineral oil |
| Flow |
max. 1 l/min, max. 80 bar |
| Weight of hydraulic unit |
58 kg (127.89 lb) full |
| Size (L x W x H) of hydraulic unit |
700 mm x 440 mm x 560 mm in stainless steel frame |
| Controls |
axis selection, direction selection, speed control |
| Weight of control panel |
2 kg |
Generator
| Electric power |
2.0 kW, 230 V / 50 Hz |
| Drive |
gasoline |
| Weight |
55 kg (121.28 lb) |
| Size (L x W x H) |
536 mm x 400 mm x 458 mm in steel frame |
Accessories
| Energy cable |
20 m (0.6 kg/m) |
| Control cable |
max. 500 m (0.4 kg/m) |
| Hydraulic hose pack |
15 m (0.2 kg/m) |
2-Axis Cutting TableThis cutting table has been designed for two-dimensional contours. One of its major plus points is its extremely low weight with the associated ease of handling and mobility. The table can be assembled and dismantled without any tools. The new construction enables the frame to be positioned in advance by means of a simple click system.
2-Axis Cutting Table
| Working area |
250 x 200 mm |
| Controls |
axis selection, direction selection, speed control |
| Material |
aluminium and stainless steel |
| Traverse speed |
0-750 mm/min |
| Weight |
12.0 kg |
| Size (L x W x H) |
620 mm x 510 mm x 690 mm |
| Drive |
brushless DC motor |
| Size transportation and storage case (L x W x H) |
825 x 520 x 290 mm |
| Article-No. |
C03.01.00.00.0.00.A |
Control Panel
| Electric power |
24 V from 2 x 10 rechargeable batteries with 3300 mAh, 2 battery packs |
| Cable length |
15 m (other lengths if requested, up to 200 m) |
| Weight |
5.0 kg |
| Size transportation and storage case (L x W x H) |
340 x 295 x 150 mm |
| Artikel-Nr. |
C03.01.45.00.0.00.A |
Circular CutterThis cutting device easily and quickly cuts circular holes in the desired object. Its low weight and small size allow the user to fix the table in any cutting position wanted – even at walls, ceilings and inclined surfaces. The height-adjustable structure is equipped with an electrical drive.
| Working area |
diameter 0-250 mm |
| Controls |
axis selection, direction selection, speed control |
| Material |
aluminium |
| Traverse speed |
10-400 mm/min |
| Space requirement |
730 mm x 560 mm |
| Drive |
brushless DC motor |
| Weight |
10.0 kg |
| Size transportation and storage case (L x W x H) |
825 x 520 x 290 mm |
| Article number |
C04.01.00.00.0.00.A |
Control Panel
| Electric Power |
24 V from 2 x 10 rechargeable batteries with 3300 mAh, 2 battery packs |
| Cable length |
15 m (other lengths if requested, up to 200 m) |
| Weight |
5.0 kg |
| Size transportation and storage case (L x W x H) |
340 x 295 x 150 mm |
| Article-No |
C03.01.45.00.0.00.A |
Universal Fixing Module for Circular Cutter
| Working area |
Diameter 250 - 800 mm |
| Material |
Aluminium |
| Space requirement |
1400 mm x 750 mm |
| Vacuum pump |
230 V AC / 270 W / suction performance 75 l/sec. |
| Suction force per foot base plate |
Up to 500 N |
| Weight |
10.0 kg (+ 6.5 kg vacuum pump) |
| Vaccum hose length |
2 x 25 m (other length on request) |
| Size transportation and storage case (L x W x H) |
825 x 520 x 290 mm |
| Article-No. |
C04.01.46.00.0.00. A |
MULTIFLEX Circular CutterThe MULTIFLEX Circular Cutter is a further development of our Circular Cutter, offering various possible applications. Thanks to the click system assembly and disassembly can be effected without using any tools. The MULTIFLEX Circular Cutter is only available in combination with the 3-components-system MACE or as accessory for users who are already possessing a MACE system.
| Working area: max. cuttting diameter without cone |
270 mm |
| Adjustable range: vertical bending range |
+90° bis -45° (=135°) |
| Adjustable range: vertical linear range |
200 mm |
| Drive |
hydraulic |
| Material |
aluminium, stainless steel, brass, plastic |
| Traverse speed |
20-200 mm/min |
| Weight |
35 kg |
| Size (L x W x H) |
900 mm x 800 mm x 900 mm |
Base Fuse ManipulatorThe base fuse manipulator has been developed for cutting SAP, MC, GP and AP bombs. After application on the bomb base, the water abrasive jet completely severs the bomb base inclusive of fuse. The manipulator is supplied standard with hydraulic drive but is also available with electrical drive.
Its modular construction and optimised weight design ensure flexible scope for deployment in all situations.
Hydraulic Unit
| Electric power supply |
0.25 kW, 230 V / 50 Hz |
| Hydraulic fluid |
mineral oil |
| Flow |
max. 1 l/min, max. 80 bar |
| Weight of hydraulic unit |
58 kg full |
| Size (L x W x H) of hydraulic unit |
700 mm x 440 mm x 560 mm in stainless steel frame |
| Controls |
direction selection, speed control |
| Weight of control panel |
2 kg |
Generator
| Electric power |
2.0 kW, 230 V / 50 Hz |
| Drive |
diesel |
| Weight |
55 kg |
| Size (L x W x H) |
536 mm x 400 mm x 458 mm in steel frame |
Accessories
| Energy cable |
20 m (0.6 kg/m) |
| Control cable |
max. 500 m (0.4 kg/m) |
| Hydraulic hose |
15 m (0.2 kg/m) |
|
