MACEAMU 700-12
Abrasive Mixing Unit
| Maximum working pressure |
700 bar (10150 PSI) |
| Pressure vessel |
12 l volume / 15 kg abrasive |
| High pressure valves |
manual |
| Weight |
115 kg (253.58 lb) empty |
| Size (L x W x H) |
725 mm x 500 mm x 780 mm |
| Safety device |
rupture disc assembly |
Operation Parameter
| Nozzle size |
0.6 mm |
| Maximum working pressure |
700 bar (10150 PSI) |
| Water flow |
6 l/min |
| Hydraulic power at the nozzle |
7 kW |
| Abrasive |
Garnet 80 mesh |
| Abrasive concentration |
10 mass % |
| Cutting time with one filling |
25 min |
| Cutting performance (in air) |
10 mm steel |
115 mm/min |
| |
25 mm steel |
46 mm/min |
| |
50 mm steel |
21 mm/min |
Connections
| High pressure water inlet |
¼ “ BSP or quick-release-coupling SSKV |
| High pressure hose between AMU and 3-axis cutting table |
500 m (0,6 kg/m) |
| Suspension outlet |
¼ “ BSP or quick-release-coupling SSKV |
| Electric power |
--- |
| Pneumatic |
--- |
HPP 700-6
High Pressure Pump (HPP)
| Maximum working pressure |
700 bar (10150 PSI) |
| Water flow |
6 l/min |
| Water tank |
50 l |
| High pressure valves |
manual |
| Weight |
135 kg (297.68 lb) empty |
| Size (L x W x H) |
900 mm x 580 mm x 710 mm |
| Safety device |
Safety valve |
| Engine |
Diesel engine 7.3 kW, electric starter |
| Water supply |
max. 6 bar |
Connections
| High pressure outlet |
¼ “ BSP or quick-release-coupling SSVK |
| High pressure hose between HPP and AMU |
2 m (0.6 kg/m) |
| Water Inlet |
½ “ quick-release-coupling
|
| Electric power |
12V battery 36 Ah |
| Pneumatic |
--- |
3-Axis Cutting TableThis cutting table is the perfect solution for 3 dimensional contours. With this system, the required geometries can be remotely cut, divided and processed. Its modular design facilitates rapid assembly and dismantling as well as setting up for the cut.
Cutting Table
| Working area |
1000 mm horizontal, 500 mm vertical, diameter 250 mm rotation |
| Drive |
hydraulic |
| Material |
aluminium and stainless steel |
| Traverse speed |
20–200 mm/min |
| Weight |
70 kg (154.35 lb) |
| Size (L x W x H) |
1300 mm x 1300 mm x 1100 mm |
| Electric power supply |
0.25 kW, 230 V / 50 Hz |
| Hydraulic fluid |
mineral oil |
| Flow |
max. 1 l/min, max. 80 bar |
| Weight of hydraulic unit |
58 kg (127.89 lb) full |
| Size (L x W x H) of hydraulic unit |
700 mm x 440 mm x 560 mm in stainless steel frame |
| Controls |
axis selection, direction selection, speed control |
| Weight of control panel |
2 kg |
Generator
| Electric power |
2.0 kW, 230 V / 50 Hz |
| Drive |
gasoline |
| Weight |
55 kg (121.28 lb) |
| Size (L x W x H) |
536 mm x 400 mm x 458 mm in steel frame |
Accessories
| Energy cable |
20 m (0.6 kg/m) |
| Control cable |
max. 500 m (0.4 kg/m) |
| Hydraulic hose pack |
15 m (0.2 kg/m) |
|
