SURFIX®Our patented SURFIX® nozzle has been developed for environmentally friendly removal of surfaces and surface coatings where no further processing is needed. This special nozzle can be used in combination with all our abrasive mixing units.
After using the WAS technology with the SURFIX® the surface is abraded and can be finished again immediately. 
| |
SURFIX 2000 |
SURFIX 700 |
| Maximum working pressure |
2000 bar |
700 bar |
| Hydraulic power at the nozzle |
57,3 kW |
7 kW |
| Water flow |
17,2 l/min |
6 l/min |
| Abrasive concentration |
10% (mass) |
10% (mass) |
| Nozzle size |
0,8 mm |
0,6 mm |
Cutting performance
| Removal of standard coatings like paint layers |
up to 16 m²/h |
up to 5 m²/h |
| Removal/cutting of standard concrete |
up to 0,13 m³/h |
up to 0,04 m³/h |
Service life
| |
up to 20 hours |
up to 30 hours |
|
